Latest News and New Products

bg_gold_gradient40 (1K)
A.T.Monitors is continually working to design and develop new and innovative products for use in many liquid leak and level monitoring applications, no matter how unusual.  With over 80 years of experience in the industry, our products are designed to be affordable, reliable, durable and easy to use.  We pride ourselves in providing innovative solutions for common and unusual applications.

ATI-6100 Series  Monitor Modules

August 8, 2016

Available soon, our new ATI-6100 Series of affordable Monitor Modules will expand our line of liquid leak and level monitoring equipment.  Each module will provide the basic functions for one or two channels featuring an on/off switch, power LED, 2 alarm LEDs, 2 SPDT 8A relays, buzzer and "Acknowledge" switch, terminal blocks for connections and an environmentally sealed NEMA-4X (IP66) polycarbonate enclosure.

  • The ATI-6102 will provide 2 channels of detection for our standard water and petroleum sensors.
  • The ATI-6120 will utilize the same plug-in display board as the ATI-6107GS and will provide a numeric readout in inches for an ATI-5029 level measurement probe.  This unit will replace the ATI-DM335.
  • The ATI-6110 will feature a 10-element bargraph display "fuel gauge", representing the fuel tank, visually showing the liquid level for an ATI-5029 level measurement probe.

Like our ATI-6107 monitor panels, these modules are powered from 12-24 Volts DC.  Compact enough for use on vehicles.

 

Downloads

›› back to top

ATI-BBM1  Battery Backup Module

module_BBM1 (60K)

February 23, 2016

Available soon, our new ATI-BBM1 Battery Backup Module is designed to provide simple and effective power management during power outages.  The module simply connects between the main 12VDC power supply and the monitor.  When the power goes out, an internal relay instantly switches to the battery pack.  It uses 12 standard AA Alkaline disposable or NiMH rechargeable batteries.  The module features a numeric LED display to show the voltage to the monitor and a dual function pushbutton switch to indicate power is ok (blue LED on) and push-to-test for battery voltage.  The module is sealed for environmental protection to a level of NEMA-4X (IP66).

 

 

Downloads

ATI-BBM1 data sheet
p d f icon download pdf

›› back to top

ATI-IWS  Industrial Wireless System

February 8, 2016

An industrial wireless system will soon be available for use in our ATI-6107GS and ATI-6107D monitors so that our ATI-5029 probe can communicate wirelessly with the monitor.  This module will also work with our upcoming new ATI-6102, ATI-6110 and ATI-6120 modules.

 

Downloads

ATI-IWS data sheet
p d f icon download pdf

›› back to top

ATI-5005F-RC  Floor Water Sensor with Relay Contact

sensor_5005f-rc (40K)

August 10, 2010

The ATI-5005F Floor Water Sensor is designed to detect water or other conductive liquids at point locations.  It can be placed directly on the floor or fastened to the wall near the floor.  The slotted mounting tabs provide easy installation and adjustment of this versatile sensor.  When the electrodes on the sensor detect water or conductive liquids, it closes the circuit and activates the internal relay, instantly closing the (Normally Open) contact to activate an external device.  When liquid is no longer present, the alarm state is automatically cleared.

This sensor does NOT need a monitor, can function with a 9 to 24 VDC power supply or battery, and features a blue LED for Power and a red LED for Alarm (relay contact).  It can also be used as a one-time water leak detector, simply by connecting a 9 volt battery and buzzer to the sensor.  Easily interfaces with PLCs.

Available soon.  For more information, download the product flyer or contact us.

Downloads

ATI-5005F-RC data sheet
p d f icon download pdf

›› back to top

ATI-5005T-RC  Thread-mount Water Sensor with Relay Contact

sensor_5005t-rc (40K) image of 5005 t r c sensor

December 16, 2009

The ATI-5005T-RC Thread-mount Water Sensor is designed to detect water or other conductive liquids at point locations in tanks, sumps, piping, electrical conduits, HVAC ducts AC units, and many other locations.  When the electrodes on the sensor detect water or conductive liquids, it closes the circuit and activates the internal relay, instantly closing the (Normally Open) contact to activate an external device.  When liquid is no longer present, the alarm state is automatically cleared.

This sensor does NOT need a monitor, can function with a 9 to 24 VDC power supply or battery, and features a blue LED for Power and a red LED for Alarm (relay contact).  It can also be used as a one-time water leak detector, simply by connecting a 9 volt battery and buzzer to the sensor.  Easily interfaces with PLCs.

Available soon.  For more information, download the product flyer or contact us.

Downloads

ATI-5005T-RC data sheet
p d f icon download pdf

›› back to top

Genset Control System

image of Cummins diesel-generator

A.T.Monitors, a manufacturer and world-wide distributor of liquid leak detection and tank monitoring systems, is pleased to announce the introduction of its Genset package.  A complete hardware solution to monitor and operate your day tank and supply tank in a Generator Set (Genset) configuration.

The Genset package is designed to be an all inclusive package that takes the guessing out of installing, configuring, operating and maintaining a Genset.  It includes four (4) of A.T.Monitors' proven products:

  • One (1) ATI-5020-4 probe for detecting the level in the day tank (overfill, pump-off, pump-on, empty).
  • One (1) ATI-6107GS monitor for providing overflow protection (high level), pump-on and pump-off functions, and low fuel level alarm.
  • One (1) ATI-5029-6 probe for monitoring the level in the supply tank.
  • One (1) ATI-DM335 display module for providing information about the level in the supply tank.

A.T.Monitors offers the ATI-5020, ATI-6107GS, ATI-5029 and ATI-DM335 as standalone purchases, but purchasing all four products in the Genset package at the bundled price provides a lower cost of ownership.  As always, your total solution is backed by the support and services of A.T.Monitors and its network of distributors.

For more information about the products and pricing of the Genset package, download the Genset system flyer.  We can also be contacted at info@atmonitors.com.

Downloads

Genset System flyer
p d f icon download pdf

User Configuration Sheet
p d f icon download pdf

›› back to top

Valid HTML 4.01 Transitional   Valid CSS!